|
|
|
Main Index
.: Legacy Saffire Range
.: Saffire
.: I've got a Mic plugged into the front of my Saffire, and I have no input. Why?
|
I've got a Mic plugged into the front of my Saffire, and I have no input. Why?
|
Check that you don't have anything plugged into the instrument/line input on that channel. A jack plugged into the instrument/line input disables the Mic input on that channel. Also, if your mic requires phantom power, please make sure that you have turned it on on the front panel of your Saffire.
|
Related Articles
|
What is the difference between input mix and cue mix?
Each pair of outputs (1/2 - 9/10) can be assigned its own unique mix of both the four input channels and 10 channels of audio from the recording software in use (Logic, Cubase, etc.). These mixes...
2005-08-01
Views: 10403
|
|
|
Why doesn't Saffire have a wordclock input?
In the applications for which the Saffire was designed, wordclock connections are not needed. Synchronisation is only needed if timing is crucial (for example when doing 'laybacks' of audio in post...
2005-08-01
Views: 4935
|
|
|
|
Glossary
Contact Us
Compatibility
Saffire
Print