Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index .: Platinum Range .: OctoPre .: Can I use the digital and analogue outputs at the same time?

Can I use the digital and analogue outputs at the same time?

The analogue outputs are always active and you can use them simultaneously with the digital outputs.

Related Articles

article If there are only 8 analogue outputs, how come there are 5 output pairs available in the lower half of SaffireControl?
As you can see from the symbol at the bottom of each output pair section, the last pair (9/10) is the SPDIF Output. Also, outputs 5/6 and 7/8 are the same signals as Headphones 1 and Headphones 2...

2005-08-01    Views: 4833   
article Is the monitor knob analogue or digital?
The monitor pot on the Scarlett 18i8 does not control the level of the virtual monitor knob in MixControl, it is just an analogue attenuator controlling the volume of the analogue signal going to...

2013-05-08    Views: 82   
article Is the monitor knob analogue or digital?
The monitor pot on the Scarlett 6i6 does not control the level of the virtual monitor knob in MixControl, it is just an analogue attenuator controlling the volume of the analogue signal going to...

2013-05-08    Views: 82   
article ISA 828 Analogue outputs.
The ISA 828 has eight balanced analogue outputs which are transmitted via a 25-pin connector that utilises the DB-25FM (TascamTM/Pro ToolsTM) pinout, as follows:

2007-08-29    Views: 3605   
article Why are Liquid Mix plugins disabled in Digital Performer when the GUI is closed?
MOTU Digital Performer uniquely handles plugins depending upon whether the plugin GUI is open or closed. When a plugin GUI is open, audio pases through the plugin in real time using the buffer...

2006-12-06    Views: 4504   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.