Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index
 Compatibility
 Control 2802
 Current Saffire Range
 Focusrite/Digidesign
 Forte
 ISA Range
 iTrack
 Legacy Saffire Range
 Liquid Range
 Platinum Range
 Compounder
 MixMaster
 OctoPre
 OctoPre LE
 Digital (ADAT)
 Penta
 Platinum Digital Options
 ToneFactory
 TrakMaster
 TrakMaster Pro
 TwinTrak Pro
 VoiceMaster
 VoiceMaster Pro
 Plug-ins
 Red Range
 Rednet
 Scarlett USB 2.0 Range
 Technical Articles
 Troubleshooting Guides
 User Manuals
 VRM Box
Main Index .: Platinum Range .: OctoPre LE .: Can I use condenser mics and dynamic mics simultaneously with my Octopre LE? Will phantom power damage the dynamic mics?

Can I use condenser mics and dynamic mics simultaneously with my Octopre LE? Will phantom power damage the dynamic mics?

The phantom power on the Octopre LE is globally switched in and out so if you are recording with condenser mics that require phantom power, any dynamic mics (that do not require phantom) that you are also using will be supplied with 48V. Generally this does not cause problems but we advise checking with the mic manufacturer first before connecting.

Related Articles

article The phantom power measures at 52V. Is this a problem?
This is perfectly normal for the unit and no damage will be caused to a microphone by the slightly increased voltage.
2005-09-26    Views: 4910   
article Can I use dynamic link with different ISA models? ISA linking explained.
It is possible to use the dynamic link with any combination of ISA 220, ISA 430 MkI and ISA 430 MkII for stereo dynamics processing. Simply connect a TRS jack cable between the dynamic link...
2005-08-10    Views: 4131   
article I can hear hum when using a dynamic mic with the TwinTrak Pro. It gets louder when I engage the 'air' switch. Is something wrong?
Unfortunately this is inevitable - dynamic mics can be good at inducing hum and the inductor circuit activated by the 'air' switch will only make it more audible. Setting the impedance to maximum...
2005-08-09    Views: 3240   
article Will the OctoPre MkII supply phantom power to my microphone?
Yes, the two phantom power switches on the front panel turn on +48V phantom power to Mic inputs 1-4 and 5-8 separately. Phantom power is only sent to the XLR connectors on the combo input, so if a...
2009-09-14    Views: 3065   
article How can I sync my OctoPre MkII Dynamic?
There are a number of synchronisation options available: OctoPre MkII Dynamic as clock source master - ADAT: Connect the OctoPre MkII Dynamic's optical output to the digital device's...
2010-02-10    Views: 4880   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.