|
|
|
Main Index
.: Platinum Range
.: OctoPre
.: Are the Octopre line inputs routed through the mic pre circuitry?
|
Are the Octopre line inputs routed through the mic pre circuitry?
|
The line inputs are not routed through the mic pre amp section but through a line level amp and then through the filter, dynamics and converter. When the 'line' button is pressed in the level knob has a range of +/-10dB (12 o'clock position is unity gain). Line inputs are never routed through mic pre circuitry since a line level input impedance needs to be much higher than a mic input impedance.
|
Related Articles
|
How to use the inputs on the Forte
Input Loom
Forte is supplied with an input loom that connects to the INPUTS port on the rear of the unit. The loom is provided with two female XLR sockets for microphone inputs and two...
2012-09-05
Views: 1530
|
|
|
What can I connect to the inputs of the OctoPre MkII?
All eight of the OctoPre MkII's audio inputs use Neutrik Combo connectors. These can accept male XLR connectors, TS (un-balanced) and TRS (balanced) jack connectors.
If an XLR cable is used,...
2009-09-14
Views: 4261
|
|
|
How do I use all 18 inputs on the Scarlett 18i20?
The Scarlett 18i20 may only have 8 analogue channels built into the unit, but you can actually record up to 18 channels simultaneously into your computer. This is as the unit also has two types of...
2013-01-10
Views: 1526
|
|
|
|
Glossary
Contact Us
Compatibility
OctoPre
Print