Should I leave my Octopre switched on when not in use? .: Focusrite Answerbase

Should I leave my VoiceMaster Pro on when it is not in use?
We suggest leaving the unit on during sessions but turning it off when the studio is not in use. It should always be the first thing you switch on and the last thing you switch off in your set...
2005-08-04 Views: 2994

Frequently, the Mute/Dim switched on my interface turn on unexpectedly. What should I do?
Make sure you have Windows sounds turned off - these play at 22kHz so may cause the Saffire to drop when played.
2007-02-05 Views: 3850

I cannot hear the DAC signal with the 'digital insert' button switched out on my TwinTrak Pro. What is wrong?
If the digital insert button is pressed in on the TwinTrak Pro then the signal from the DAC is routed to the channel line inputs. If the digital insert button is pressed out then the DAC signal is...
2005-08-09 Views: 3275

What is the difference between the Octopre and Octopre LE?
Most notable is the pre-amp designs. They are similar in performance but not identical. The original OctoPre is a typical Class A Platinum design, (based around a 737 Rhom transistor) the LE is an...
2005-08-02 Views: 9182

Pin out for the Octopre full spec AD card.
The Pin out for the 9 pin D Sub connector on the Octopre AD card can be found here.
2005-11-22 Views: 4437

Should I leave my Octopre switched on when not in use?

Related Articles