How do I enable hardware monitor control over the outputs on the Pro 24? .: Focusrite Answerbase

Hardware Control doesn't work / I can't change the volume from the front panel.
Hardware control is a feature which allows the MONITOR knob and DIM/MUTE switches to be linked to the SaffireControl and SaffireControl PRO software. This can be turned on in the...
2006-09-26 Views: 7980

Utilising the RCA (Phono) Outputs on the Saffire 6 USB
If you want to use the 2 pairs of RCA outputs simultaneously, for example to plug into a DJ Mixer, you need to set the monitor gain knob to its maximum in order to match the output levels. This...
2009-10-08 Views: 8579

DJ setups with the Scarlett 2i4
The 2i4 is a great tool for the laptop DJ. Its two phono outputs make connection to a mixer very easy, and the ability to switch the headphone feed source between outputs 1/2 or outputs 3/4 mean...
2012-09-19 Views: 2590

VIDEO: Saffire Pro 40 setup with Sony Acid Pro 6
This video guides you through: - Assigning a mix to the headphones outputs on the Saffire Pro 40 - Setting up the Saffire Pro 40 as the audio device in Sony Acid Pro 6 - How to record into...
2009-08-27 Views: 5190

Can Scarlett MixControl work with the 2i4?
As the 2i4 only has two inputs and 4 outputs, Scarlett MixControl is not necessary for its use; so is not compatible with it. You will need to do all routing in your chosen DAW and if you would...
2012-09-19 Views: 2001

How do I enable hardware monitor control over the outputs on the Pro 24?

Related Articles