Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index .: Liquid Range .: The Liquid Channel .: Can I connect a guitar direct to the Liquid Channel?

Can I connect a guitar direct to the Liquid Channel?

The Liquid Channel does not feature a high impedance instrument input and a DI box is needed to connect an electric guitar or bass direct to it.

Related Articles

article Can I connect an electric guitar or bass direct into the VoiceMaster?
No, the VoiceMaster does not have a high impedance instrument input. You will need a DI box between the guitar and the VoiceMaster.

2005-08-05    Views: 6205   
article Can I connect my Octopre direct to my computer?
This is not possible - you will need an audio interface/sound card to connect the outputs of the Octopre to. The optional ADC cards for the Octopre give you the option of a digital audio output...

2005-08-03    Views: 4010   
article What steps do I need to take to link two Liquid Channels?
To link two Liquid Channels follow these steps:1) Connect the 'digital link bus' out of the LC you wish to use as master to the 'digital link bus' in of the slave LC.2) Connect the 'digital link...

2005-08-08    Views: 3433   
article Is the Liquid Mix EQ the same as The Liquid Channel EQ?
No. The Liquid Channel (TLC) uses a digital filter based EQ which is modelled upon Focusrite's legendary ISA 110, whereas the Liquid Mix EQ uses dynamic convolution to emulate the unique sonic...

2006-07-27    Views: 4474   
article If the Liquid Channel processes at 96KHz, is there any point in running at 192KHz?
When using the Liquid Channel the incoming analogue signal is converted to the digital domain at one of 6 sample rates. When we sampled the impulse responses of the original gear it was done at...

2005-08-08    Views: 4294   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.