Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index
 Compatibility
 Control 2802
 Current Saffire Range
 Focusrite/Digidesign
 Forte
 ISA Range
 iTrack
 Legacy Saffire Range
 Liquid Range
 Platinum Range
 Plug-ins
 Red Range
 Rednet
 Rednet 1 & 2
 Rednet 3
 Rednet 4
 Rednet 5
 Scarlett USB 2.0 Range
 Technical Articles
 Troubleshooting Guides
 User Manuals
 VRM Box
Main Index .: Rednet .: Rednet 1 & 2 .: Audio connections on the Rednet 1 & 2

Audio connections on the Rednet 1 & 2

The analogue line-level inputs and outputs on the Rednet 1 & 2 are made via back panel mounted 25-pin D connectors. The pin connections used follow the Tascam DB25 convention which can be found here.

Rednet 1 Rear Panel:



Rednet 2 Rear Panel:

Related Articles

article Audio connections on the Rednet 5
A RedNet 5 will allow up to 32 channels of inputs and 32 channels of outputs between your Pro Tools rig and RedNet network (16i/o at 192kHz sample rates), via standard DigiLink connections....
2011-05-19    Views: 1068   
article Audio connections on the Rednet 3
The Rednet 3 provides a maximum of 32 digital inputs and outputs using the following connections and protocols: - 32 channels of ADAT optical inputs and outputs (16 I/O at 192kHz) via 16 Toslink...
2011-03-17    Views: 1667   
article Audio connections on the Rednet 4
The Rednet 4's 8 input channels have both microphone inputs (on XLR connections) and line level inputs (on a single 25 pin connector adhering to the Tascam DB25 standard). Inputs one and two also...
2011-03-17    Views: 1284   
article Problems streaming audio at 96kHz from Dante Virtual Soundcard
Currently, in order to Dante Virtual Soundcard to pass audio correctly a certain Dante Latency setting must be used in the Dante Virtual Soundcard settings. You must switch off Dante Virtual...
2013-04-26    Views: 127   
article Problems streaming audio at 96kHz from Dante Virtual Soundcard
Currently, in order to Dante Virtual Soundcard to pass audio correctly a certain Dante Latency setting must be used in the Dante Virtual Soundcard settings. You must switch off Dante Virtual...
2013-04-26    Views: 113   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.