Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index
 Compatibility
 Control 2802
 Current Saffire Range
 Focusrite/Digidesign
 Forte
 ISA Range
 iTrack
 Legacy Saffire Range
 Liquid Range
 Platinum Range
 Plug-ins
 Red Range
 Rednet
 Scarlett USB 2.0 Range
 Technical Articles
 Troubleshooting Guides
 User Manuals
 VRM Box
Main Index .: Control 2802 .: Faders are moving on their own when using fader automation in Pro Tools

Faders are moving on their own when using fader automation in Pro Tools

If the faders on your Control 2802 are moving on their own, being moved by another fader or continue to move after a sudden fader movement when using fader automation in Pro Tools you should switch off MIDI thru in Pro Tools as these issues are caused by unwanted MIDI feedback.

In Pro Tools select the Options menu at the top of the screen and make sure that 'MIDI Thru' is unticked.

If you continue to experience problems please contact support using the button at the top right of this page.

Related Articles

article Can I edit Fader Automation from the 2802 in my DAW?
Pro Tools and Cubase users: Fader automation data is recorded to your DAW as MIDI data, mod wheel messages are used on MIDI channels 1-8. Once you have recorded the automation, this can be...
2011-07-18    Views: 1451   
article How do I set up my ISA One with Pro Tools LE and M-Powered hardware?
Some users wish to use their ISA one preamp with Pro Tools LE or M-Powered by digitally connecting their ISA to the digital inputs of their Pro Tools hardware. This will allow a high quality...
2009-08-24    Views: 10008   
article VIDEO: Pro Tools 9 DAW setup guide
The following video guides you through how to set up your interface for recording and playback in Pro Tools 9 on a Mac:
2011-01-12    Views: 17866   
article Can I use all inputs/outputs when using Dual Unit mode with Pro Tools 9/10?
Pro Tools 9 and Pro Tools 10 only allow for the use of a maximum of 32 simultaneous inputs/outputs. For this reason if your input/output count when using two FireWire Saffires exceeds 32, you will...
2011-12-07    Views: 3381   
article My Saffire makes a buzzing sound when using Pro Tools on a PC
If you are experiencing a buzzing noise that changes tone with buffer size in Pro Tools this is probably due to a mismatch in the buffer size reported by the driver and the H/W buffer size in Pro...
2011-01-20    Views: 5320   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.