Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index
 Compatibility
 Control 2802
 Current Saffire Range
 Focusrite/Digidesign
 Forte
 ISA Range
 iTrack
 Legacy Saffire Range
 Liquid Range
 Platinum Range
 Compounder
 MixMaster
 OctoPre
 OctoPre LE
 Penta
 Platinum Digital Options
 ToneFactory
 TrakMaster
 TrakMaster Pro
 TwinTrak Pro
 VoiceMaster
 VoiceMaster Pro
 Plug-ins
 Red Range
 Rednet
 Scarlett USB 2.0 Range
 Technical Articles
 Troubleshooting Guides
 User Manuals
 VRM Box
Main Index .: Platinum Range .: ToneFactory .: Can I record two signals simultaneously with one ToneFactory?

Can I record two signals simultaneously with one ToneFactory?

No, the ToneFactory is a mono device - you can only send one signal through it at a time. If you want to process more than one signal at a time with the ToneFactory, you must mix them together (e.g. using a mixing desk aux bus) first. If you do this you will have to apply the same processing to both sounds, which is rarely an advantage.

Related Articles

article Tonefactory Troubleshooting Guide
No LEDs illuminate • Is the POWER switched on? • Is the correct mains voltage being used for your unit? If not, the fuse may blow, requiring the correct fuse to be refitted. (Click here to find...
2009-06-29    Views: 1805   
article How does the 'overdrive' circuitry on the ToneFactory work
The ToneFactory is the only piece of Focusrite equipment with the overdrive circuitry in it. It works by generating lots of harmonics from a filtered band of the input signal and allowing you to...
2005-08-08    Views: 3757   
article Can I use the AES and S/PDIF outputs of the ISA 220 A/D card simultaneously?
We do not advise this since both outputs share the same power source. There is no problem in using one of the digital outputs and the analogue output at the same time however.
2005-09-26    Views: 3827   
article Can I record both channels at the same time?
You can record both channels of the iTrack Solo simultaneously into your iPad, but some applications like Garageband will only let you record one mono or one stereo track at the same time. If you...
2012-11-29    Views: 1222   
article Do I need wordclock to record from my ISA A/D card to my computer soundcard?
No, the digital output has a clock signal embedded within the audio signal. Simply connect the digital output of the ISA to the soundcard's digital input. The soundcard must have external sync...
2005-08-02    Views: 5286   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.