I am confused by what the buttons do on my Platinum ADC card (Penta, Trak Master, VoiceMaster Pro, TwinTrak Pro, TrakMaster Pro). What do I need to press in?
These buttons select the sample frequency. The button on the left swaps between 44.1 and 48 KHz. When the button on the right is pressed in it multiplies the sample frequency selected by two (hence the X2 marking) so now the button on the left swaps between 88.2 and 96KHz. As an example:
For 96KHz - left button out, right button in For 48KHz - left button out, right button out
Guide to Setting up your Studio Part 2
Back To Part 1 | Continue To Part 3
Some users seem concerned about whether the impedance differences between various inputs and outputs will cause any problems with their...
Guide to Setting up your Studio Part 3
Back To Part 2
Fig. 8: Table of fuses required for Focusrite units
Focusrite deviceFuse 230/220V ACFuse 115/100V AC
Red 1 T250mA anti-surge (Time lag) T500mA anti-surge (Time...
Guide to Setting up your Studio Part 1
Continue To Part 2This article is a tutorial-style guide to setting up your system correctly, and eliminating any problems to get the best results from your studio. The two most popular home...