Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index .: Focusrite/Digidesign .: Focusrite/Digidesign Products

Focusrite/Digidesign Products

All enquiries about the Command 8, Mbox, Control 24, and D2/ D3 plug-ins are taken by Avid (Digidesign).

Their contact details can be found via the support section of their website here.

Related Articles

article Complete List of Fuses used in Focusrite Products
Focusrite deviceFuse 230/220V ACFuse 115/100V AC Red 1 T250mA anti-surge (Time lag) T500mA anti-surge (Time lag) Red 2 T250mA anti-surge (Time lag) T500mA anti-surge (Time lag)...

2005-08-04    Views: 11196   
article How do I connect my VoiceMaster Pro to my Digidesign 002?
If you wish to record from a mic, line or instrument source, through the VoiceMaster Pro, then connect the +4dBu XLR output of the VMPro to one of the 1/4" jack line inputs on the back of the...

2005-08-04    Views: 8010   
article Are Focusrite products compatible with OS 10.8 Mountain Lion?
Please find a summary below of which products are supported under Mountain Lion: Gatekeeper Gatekeeper will need to be disabled for any software/drivers that are not officially...

2012-07-25    Views: 19493   
article How do I set up my ISA One with Pro Tools LE and M-Powered hardware?
Some users wish to use their ISA one preamp with Pro Tools LE or M-Powered by digitally connecting their ISA to the digital inputs of their Pro Tools hardware. This will allow a high quality...

2009-08-24    Views: 10009   
article VIDEO: Pro Tools 9 DAW setup guide
The following video guides you through how to set up your interface for recording and playback in Pro Tools 9 on a Mac:

2011-01-12    Views: 17866   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.