Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index
 Compatibility
 Control 2802
 Current Saffire Range
 Focusrite/Digidesign
 Forte
 ISA Range
 iTrack
 Legacy Saffire Range
 Liquid Range
 Platinum Range
 Plug-ins
 Red Range
 Red 1 Quad Mic-Pre
 Red 5 Power Amplifier
 Red 8 Dual Mic-Pre
 Rednet
 Scarlett USB 2.0 Range
 Technical Articles
 Troubleshooting Guides
 User Manuals
 VRM Box
Main Index .: Red Range .: LED not working when push button engaged - what to check.

LED not working when push button engaged - what to check.

If a button does not light up when pushed in then it may be that the LED has come out of its socket. You can check this by removing the plastic lens cap (simply pull off) and making sure that the LED is correctly seated. If the LED has come out, re-insert it with the legs in the horizontal plane and replace the cap. If it still won't light, remove the cap and take the LED out of the socket, turn it through 180 degrees and re-insert it. Put the lens cap back on and see if it lights now. If not then please contact us for further info.

Related Articles

article The limiter on my 220 does not seem to be working. How can I check?
The limiter has a fixed threshold of +20dBu so will not become active unless the output level reaches this (it's purpose is to prevent overload of the optional A/D converter so the 'active' LED...
2005-08-11    Views: 2913   
article I installed a PCI firewire card in my Mac and the Liquid Mix stopped working.
After installing an additional PCI firewire card in a Apple G5 or Mac Pro, earlier versions of Liquid Mix may fail to be recognised when connected to the built in Mac firewire ports. To resolve...
2006-12-12    Views: 5592   
article I've got a Mic plugged into the front of my Saffire, and I have no input. Why?
Check that you don't have anything plugged into the instrument/line input on that channel. A jack plugged into the instrument/line input disables the Mic input on that channel. Also, if your mic...
2005-08-01    Views: 5919   
article Saffire 6 USB Troubleshooting Guide
My Saffire won't connect to my computer - the USB light does not light - Please ensure that you have the latest driver installed for your Saffire 6 USB before connecting it. The latest driver is...
2009-09-15    Views: 37965   
article The Liquid Channel input level meter is barely registering signal before distortion occurs. What can I check?
Distortion should not be introduced by the Liquid Channel until the O/L LED lights. If this is not the case then make sure the harmonics knob is set to 0, the compressor and EQ are not switched...
2005-09-21    Views: 4949   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.