What digital options are available for the Octopre LE? .: Focusrite Answerbase

I can't see the digital output connectors on the back of my new Octopre. What do I need to get?
The Octopre (and other Platinum units) do not come with digital outputs as standard. You can purchase a digital output card which you can be easily fitted into the unit to give you a digital...
2005-08-03 Views: 3350

Can I stop the Octopre from defaulting to the same digital card settings every time I turn it on?
The Octopre does not have a memory chip in it so it will always turn on with the same bit rate and sample frequency settings. We advise that the Octopre is the first thing to be turned on in a...
2005-08-03 Views: 3328

Pin out for the Octopre full spec AD card.
The Pin out for the 9 pin D Sub connector on the Octopre AD card can be found here.
2005-11-22 Views: 4439

How can I sync up the OctoPre MkII's clock?
There are two synchronisation options available: OctoPre MkII as Clock Source Master: Connect the OctoPre MkII to the digital device via ADAT and ensure that the receiving device is set to...
2009-09-14 Views: 5807

Connecting an Octopre to a Digi 002.
If the optional A/D converter card is fitted then you can use a single ADAT cable to connect from either of the Octopre ADAT outputs to the ADAT in of the 002. Make sure that the bit depth and...
2005-09-24 Views: 8240

What digital options are available for the Octopre LE?

Related Articles