Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index
 Compatibility
 Control 2802
 Current Saffire Range
 Focusrite/Digidesign
 Forte
 ISA Range
 iTrack
 Legacy Saffire Range
 Saffire
 Saffire Control Software
 Saffire LE
 Saffire Plugins
 Saffire PRO 10 & 26
 Digital
 Monitoring
 Standalone Mode
 Saffire Range: Compatibility
 Saffire Range: Mac Specific
 Saffire Range: PC Specific
 Liquid Range
 Platinum Range
 Plug-ins
 Red Range
 Rednet
 Scarlett USB 2.0 Range
 Technical Articles
 Troubleshooting Guides
 User Manuals
 VRM Box
Main Index .: Legacy Saffire Range .: Saffire PRO 10 & 26 .: Digital .: I'm not using the ADATs, can I save on CPU by disabling them?

I'm not using the ADATs, can I save on CPU by disabling them?

Yes. There is an option in Saffire Control PRO to disable the ADATs. This is described below.

Mac:
Go to 'Hardware' in the menu bar and select 'Disable ADATs for better CPU usage'

PC:
Go to 'Hardware' in the menu bar and select 'Disable ADATs for better CPU usage'
Click on the Saffire PRO logo on the top right and select 'Disable ADATs for better CPU usage'

Disabling the ADATs will turn off all streaming from the ADAT ports, giving you more CPU power to dedicate to your mix and more bandwidth for other firewire devices connected to the same firewire bus.

Related Articles

article Digital Card Jumper Positions - Disabling Channels 5-8
Four jumpers on the digital card can be made to disable channels 5-8 on the AES Output. This is so that a standard 25-pin to 25-pin Pro ToolsTM cable can be used to record channels 1-4 at 192kHz....
2007-10-15    Views: 2936   
article How do I save and load Snapshots of my Liquid Mix plugins?
Snapshots can be saved and loaded in one of two ways: 1. The 'Save' and 'Load' buttons on the Liquid Mix hardware Pressing the 'Save' button on the Liquid Mix hardware saves the current EQ...
2006-07-07    Views: 5043   
article How is the replica memory allocated on the Liquid Channel? Can I remove mic pre replicas and replace them with compressor replicas?
The Liquid Channel can store up to 40 pre emulations and 40 compressor emulations. You cannot trade memory places e.g. have 30 pres and 50 compressors. The emulations themselves are quite small...
2005-08-08    Views: 3308   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.