How do I access the digital inputs? .: Focusrite Answerbase

How to use the inputs on the Forte
Input Loom Forte is supplied with an input loom that connects to the INPUTS port on the rear of the unit. The loom is provided with two female XLR sockets for microphone inputs and two...
2012-09-05 Views: 1525

How do I use the S/PDIF inputs and outputs on the PRO 14 and how should I sync the devices?
The S/PDIF connection on the back of a Pro 14 is a connection that allows two channels of digital audio to be passed along a single unbalanced co-axial connection. This can be used to connect a...
2010-08-10 Views: 14081

Digital Inputs and Sync Source Selection with a Saffire PRO
As of Saffire PRO 2.0, SPDIF and ADAT digital inputs are always 'ON' (unless you have disabled the ADATs for better CPU performance). This means that you no longer have to turn the digital inputs...
2007-07-06 Views: 4895

How many inputs and outputs are available at 88.2kHz or 96kHz?
When running at the higher sample rates of 88.2kHz or 96kHz on the Saffire Pro 40, you will lose some ADAT channels. This is standard place when using ADAT, as ADAT only supports the full eight...
2013-03-20 Views: 422

Can I use all inputs/outputs when using Dual Unit mode with Pro Tools 9/10?
Pro Tools 9 and Pro Tools 10 only allow for the use of a maximum of 32 simultaneous inputs/outputs. For this reason if your input/output count when using two FireWire Saffires exceeds 32, you will...
2011-12-07 Views: 3381

How do I access the digital inputs?

Related Articles