Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index
 Compatibility
 Control 2802
 Current Saffire Range
 Focusrite/Digidesign
 Forte
 ISA Range
 iTrack
 Legacy Saffire Range
 Saffire
 Saffire Control Software
 Saffire LE
 Saffire Plugins
 Saffire PRO 10 & 26
 Digital
 Monitoring
 Standalone Mode
 Saffire Range: Compatibility
 Saffire Range: Mac Specific
 Saffire Range: PC Specific
 Liquid Range
 Platinum Range
 Plug-ins
 Red Range
 Rednet
 Scarlett USB 2.0 Range
 Technical Articles
 Troubleshooting Guides
 User Manuals
 VRM Box
Main Index .: Legacy Saffire Range .: Saffire PRO 10 & 26 .: Standalone Mode .: Standalone mode options.

Standalone mode options.

There are two choices for using the Saffire pro in standalone mode.

Tracking Mode will route the analogue inputs to the ADAT outputs, and the ADAT inputs to the analogue outputs.

Mixer Mode will leave the Saffire set up exactly as it was when disconnecting from the computer.

In both cases make sure that you've selected the sampling rate that you want to work at.

Related Articles

article There is a problem with the output volume in Standalone mode
When using Standalone Mixer mode it is important to check the output levels are set up in SaffireControl PRO. The only alterations to the saved set up that can be made when used in standalone...
2006-09-26    Views: 4779   
article Can the Focusrite Scarlett interfaces run in "Standalone Mode"?
Unlike the Focusrite Saffire range of FireWire Audio Interfaces, the Scarlett 2i2, 2i4, 8i6 and 18i6 cannot currently run in Standalone Mode. The 8i6 and 18i6 specifically may pass audio...
2011-05-16    Views: 4920   
article What's the difference between Soundcard Mode and Track Mode?
SaffireControl has two buttons on the bottom right that are used to select the two main modes of operation (TRACK MODE and S/CARD MODE: the first is the standard tracking mode for recording (the...
2005-08-01    Views: 10147   
article What digital options are available for the Octopre LE?
There is only one digital card which can be fitted in the Octopre LE: this gives the unit an 8-channel ADAT Lightpipe input and output. For more information check out the Octopre LE CODEC section...
2005-09-26    Views: 3899   
article VIDEO: Saffire PRO LED states on start-up
When the Saffire Pro boots up in Firewire mode (i.e. when it detects a connection to the computer), the power LED will flash quickly as shown here: When the Saffire Pro boots up in...
2009-05-25    Views: 3438   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.