Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index
 Compatibility
 Control 2802
 Current Saffire Range
 Focusrite/Digidesign
 Forte
 ISA Range
 iTrack
 Legacy Saffire Range
 Saffire
 Saffire Control Software
 Saffire LE
 Saffire Plugins
 Saffire PRO 10 & 26
 Saffire Range: Compatibility
 Saffire Range: Mac Specific
 Saffire Range: PC Specific
 Liquid Range
 Platinum Range
 Plug-ins
 Red Range
 Rednet
 Scarlett USB 2.0 Range
 Technical Articles
 Troubleshooting Guides
 User Manuals
 VRM Box
Main Index .: Legacy Saffire Range .: Saffire Range: PC Specific .: Frequently, the Mute/Dim switched on my interface turn on unexpectedly. What should I do?

Frequently, the Mute/Dim switched on my interface turn on unexpectedly. What should I do?

Make sure you have Windows sounds turned off - these play at 22kHz so may cause the Saffire to drop when played.

Related Articles

article How does the VRM Box work with my existing audio interface?
1. Using the USB cable provided, connect the VRM Box to the USB port of your computer 2. Connect the S/PDIF output on your audio interface into the VRM Box S/PDIF input 3. In your audio...
2011-01-12    Views: 9120   
article Should I leave my Octopre switched on when not in use?
It is best to turn the unit off when it is not being used so as to let the capacitors discharge and save wear on the resistors therefore giving the unit a slightly longer shelf life.
2005-08-04    Views: 2815   
article Can the ISA 220 remember settings when I turn it off and back on again?
The ISA 220 does not have a memory chip so if you turn it off and back on again, all of the buttons will default to their initial setting.
2005-09-26    Views: 3116   
article I cannot hear the DAC signal with the 'digital insert' button switched out on my TwinTrak Pro. What is wrong?
If the digital insert button is pressed in on the TwinTrak Pro then the signal from the DAC is routed to the channel line inputs. If the digital insert button is pressed out then the DAC signal is...
2005-08-09    Views: 3287   
article Hardware Control doesn't work / I can't change the volume from the front panel.
Hardware control is a feature which allows the MONITOR knob and DIM/MUTE switches to be linked to the SaffireControl and SaffireControl PRO software. This can be turned on in the...
2006-09-26    Views: 7986   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.