Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index .: Legacy Saffire Range .: Saffire .: Headphones .: I only hear sound through one of my headphones when monitoring in Garageband

I only hear sound through one of my headphones when monitoring in Garageband

When you set up a new audio track, select Mono track and channel 1 as the input source (or channel 2 if you have a mic/instrument plugged into the 2nd channel port on the Saffire) to create a Mono track.

Related Articles

article I can't get any sound from the monitor outputs of my VoiceMaster Pro when using the mic input.
Check the following:- Is the power switched on?- Is the LINE switch on the front panel switched out?- Are the INPUT and OUTPUT LEVELS set correctly?- For microphones that require phantom power (ie...

2005-08-03    Views: 4739   
article I can’t hear anything from Saffire MixControl through my headphones
The headphone outputs from Saffire MixControl are copies of specific line outputs on the rear of the interface, so it is important to ensure that you’re routing audio to the correct outputs. These...

2009-09-30    Views: 25039   
article Why can't I get any sound through my headphones using my Saffire PRO?
If you cannot get any sound out of your headphones, either from the inputs, or playing back from a computer, please try the following steps: 1. Press the “Track” button. This will activate...

2007-07-10    Views: 7368   
article Why can't I get any sound through my headphones using my Saffire?
If you cannot get any sound out of your headphones, either from the inputs, or playing back from a computer, please try the following steps: 1. Press the “Track” button. This will activate...

2007-07-10    Views: 6792   
article Why can't I get any sound through my headphones using my Saffire LE?
If you cannot get any sound out of your headphones, either from the inputs, or playing back from a computer, please try the following steps: 1. Press the “Track” button. This will activate...

2007-07-10    Views: 7230   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.