Rednet 5 .: Focusrite Answerbase

Audio connections on the Rednet 5
A RedNet 5 will allow up to 32 channels of inputs and 32 channels of outputs between your Pro Tools rig and RedNet network (16i/o at 192kHz sample rates), via standard DigiLink connections....
2011-05-19 Views: 1071

How can I sync my RedNet 5 and Pro Tools rig together?
The RedNet 5 is able to sync to an external Word Clock or loop sync signal via its BNC connectors. Alternatively RedNet's clock can be used as the sync master.
2011-05-19 Views: 1162

Do I need a RedNet PCIe card with my RedNet 5/Pro Tools rig?
A RedNet PCIe card is not essential, as RedNet 5 uses Pro Tools HD cards to get low latency audio in and out of Pro Tools and RedNet. RedNet 5 acts as the host in this case.
2011-05-19 Views: 1341

Which network cables are suitable for use with Rednet?
A RedNet network requires a Gigabit network infrastructure. The following cable types are permitted: Cat 5e Cat 6 Both shielded and unshielded cables are suitable. As dictated by...
2013-04-25 Views: 82

I can't see metering in RedNet Control
If you find that you have no metering on the graphics in RedNet Control, then this is likely due to a FireWall on your system. You will need to add RedNet Control to the list of exceptions...
2013-04-25 Views: 62

I get a No More Flows error in Dante Controller
This is commonly caused by people using Static IP Addresses and trying to route between Dante Virtual Soundcard and . RedNet uses Bonjour in order to assign IP addresses to elements of the...
2013-04-25 Views: 61

Rednet 5

Articles