Saffire PRO 10 & 26 .: Focusrite Answerbase

Is Your Saffire PRO Software Up To Date?
If you are experiencing problems with your Saffire PRO, the first thing to do is to check that you are running the latest version of your Saffire PRO software. Updates are regularly released on...
2007-06-29 Views: 10265

VIDEO: Saffire PRO LED states on start-up
When the Saffire Pro boots up in Firewire mode (i.e. when it detects a connection to the computer), the power LED will flash quickly as shown here: When the Saffire Pro boots up in...
2009-05-25 Views: 3435

What are the Power Supply Specs for my Saffire PRO?
The Saffire PRO's Power Supply has the following specifications: Output Voltage: 15 Volts Output Current: 0.6/1.4 Amps, Alternating Current (AC) Below are pictures of the Saffire PRO's Power...
2007-09-13 Views: 4761

Using multiple Saffire PRO units together in Mac OS X
Please Note: Before attempting to use mutiple Saffire PROs, you must ensure that both units have the same up to date firmware, and are running at the same sample rate. You may also want to disable...
2007-07-25 Views: 11058

Firewire buffer size cannot be changed in the DAW ASIO control panel
You can change the ASIO buffer size within the DAW set up pages. You cannot change the Firewire buffer size when the DAW is running. This can be done by going to the Windows Start menu > All...
2006-09-29 Views: 11286

The Saffire Pro causes my mac to crash / grey screen.
Sometimes the Apple CoreAudio driver has difficulty connecting to the Saffire PRO 26 i/o. If this happens, it may cause the Mac to crash when re-setting the unit. If you find that your Mac is...
2006-09-26 Views: 5784

Why can't I get any sound through my headphones using my Saffire PRO?
If you cannot get any sound out of your headphones, either from the inputs, or playing back from a computer, please try the following steps: 1. Press the “Track” button. This will activate...
2007-07-10 Views: 7297

I can hear software outputs 1 and 2 on other outputs.
Above the input, S/W mix slider for outputs 3+4, is a switch for either 1/2 or 3/4. This switch either routes the audio from 1+2 or 3+4 to that output. There is a similar switch for the first 10...
2006-09-26 Views: 5526

Where can I find a Saffire PRO 26 i/o Installation Guide?
Installation instructions can be found on the installer CD case, and on the Saffire PRO downloads page on the Focusrite website. Please read the installation instructions carefully. PC USERS...
2006-09-26 Views: 8156

Sample rate changes and set up.
The quickest way to change the way your Saffire pro is set up is to load the preset sessions files. These session files can be found on the installer CD along with a PDF explaining the function of...
2006-09-26 Views: 5658

Updating your Saffire PRO Firmware on Windows Vista
Some users who purchased their Saffire PRO before compatibility with Windows Vista was introduced may experience problems with the initial Firmware upgrade from the pre-Vista Firmware (version 1)....
2007-08-23 Views: 10427

Saffire PRO 10 & 26

Subcategories

Articles