Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index
 Compatibility
 Control 2802
 Current Saffire Range
 Focusrite/Digidesign
 Forte
 ISA Range
 ISA 110 Limited Edition / ISA 215
 ISA 220 Session Pack
 ISA 428 MkII
 ISA 428 Pre Pack
 ISA 430 MKII Producer
 ISA 430 Producer Pack
 ISA 8-channel ADC
 ISA 828
 ISA One
 ISA Two
 iTrack
 Legacy Saffire Range
 Liquid Range
 Platinum Range
 Plug-ins
 Red Range
 Rednet
 Scarlett USB 2.0 Range
 Technical Articles
 Troubleshooting Guides
 User Manuals
 VRM Box
Main Index .: ISA Range .: ISA 8-channel ADC

ISA 8-channel ADC

Articles relating to the ISA 8-channel ADC (compatible with ISA 428 and ISA 828)

Articles

article Digital Card Jumper Positions - Disabling Channels 5-8
Four jumpers on the digital card can be made to disable channels 5-8 on the AES Output. This is so that a standard 25-pin to 25-pin Pro ToolsTM cable can be used to record channels 1-4 at 192kHz....
2007-10-15    Views: 2941   
article ISA 828 Recording AES Outputs 1-8 to Pro Tools HD at 192kHz
To record all eight channels digitally to Pro ToolsTM HD at 192kHz, all eight AES channels need to be enabled on the ISA 828 (default jumper positions shown here) and 2 Digital cards must be...
2007-10-15    Views: 4477   
article ISA 828 ADC DB25 Pin Out Configurations

2007-10-19    Views: 3629   
article ISA 828 ADC ADAT Output Configurations
The ADATTM output connectors operate as follows: 44.1/48kHz sample rates: Connector 1 = channels 1 to 8 in parallel Connector 2 = channels 1 to 8 in parallel (identical to connector 1)...
2007-10-16    Views: 3553   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.