Focusrite Answerbase - Deutsch
Die offizielle Quelle für schnelle Hilfe und Informationen zu Ihren Focusrite-Produkten
English | German
Glossary Contact Us
Search  
Main Index
 Aktuelle Saffire Baureihe
 Control 2802
 Focusrite/Digidesign
 Forte
 ISA Reihe
 ISA 110 Limited Edition / ISA 215
 ISA 220 Session Pack
 ISA 428 Pre Pack
 ISA 430 MKII Producer
 ISA 828
 ISA Two
 iTrack
 Kompatibilität
 Liquid Reihe
 Manuals und Software
 Platinum Range
 Plug-Ins
 Red Range
 Rednet
 Saffire Reihe
 Scarlett USB 2.0 Baureihe
 Technik bezogene Artikel
 VRM Box
Main Index .: ISA Reihe .: ISA 430 MKII Producer .: How can I configure the ISA 430MKII in stereo

How can I configure the ISA 430MKII in stereo

Although a single ISA 430 MKII can act only as a mono
or split mono unit, it's possible to link two MKIIs together,
using the 'dynamic link' socket on the rear panel. Using a
single stereo TRS jack cable, this allows stereo operation of
the compressor, plus dual mono EQ.

Related Articles

article Is the ISA 430 MKII a Class A device, and why is that important?
Yes, the 430 MKII is a Class A device. Why? Well, Class A is a type of amplifier design in which you have a standing DC current running through your amplifier circuits all the time. As the...
2005-08-02    Views: 2226   
article How is the 9-pin / D-Sub connector configured?
The 9-pin D-Sub connector on the 430 MkII ADC card is not a standard 'serial' port and does not send data that a serial port on a computer would receive and understand. It can be switched between...
2005-08-02    Views: 4185   
article Can I record two signals simultaneously with one ToneFactory?
No, the ToneFactory is a mono device - you can only send one signal through it at a time. If you want to process more than one signal at a time with the ToneFactory, you must mix them together...
2005-08-08    Views: 2064   
article I have connected my VoiceMaster Pro via S/PDIF to my sound card but am only receiving signal on the left channel. What is wrong?
There is nothing wrong here. The VoiceMaster Pro is a mono unit i.e. it has one channel only. SPDIF is a stereo digital audio format i.e. it has two channels (left and right). The signal from...
2005-08-04    Views: 2728   
article I only hear sound through one of my headphones when monitoring in Garageband
When you set up a new audio track, select Mono track and channel 1 as the input source (or channel 2 if you have a mic/instrument plugged into the 2nd channel port on the Saffire) to create a Mono...
2007-02-06    Views: 2359   


.: Powered by Lore 1.6.3

Copyright 2009 Focusrite Audio Engineering Ltd. All Rights Reserved.