Focusrite Answerbase - Deutsch
Die offizielle Quelle für schnelle Hilfe und Informationen zu Ihren Focusrite-Produkten
English | German
Glossary Contact Us
Search  
Main Index
 Aktuelle Saffire Baureihe
 Control 2802
 Focusrite/Digidesign
 Forte
 ISA Reihe
 iTrack
 Kompatibilität
 Liquid Reihe
 Manuals und Software
 Platinum Range
 Compounder
 MixMaster
 OctoPre
 Digital
 OctoPre LE
 Penta
 Platinum Digital Options
 ToneFactory
 TrakMaster
 TrakMaster Pro
 TwinTrak Pro
 VoiceMaster
 VoiceMaster Pro
 Plug-Ins
 Red Range
 Rednet
 Saffire Reihe
 Scarlett USB 2.0 Baureihe
 Technik bezogene Artikel
 VRM Box
Main Index .: Platinum Range .: OctoPre .: What are the Octopre A/D converter specs?

What are the Octopre A/D converter specs?

The Octopre ADC specs are:

0dBFs = +22dBu
S/N = -109dBfs measured with A weighting filter at 48Khz sample frequency.
THD = <0.003% at 0dBfs with 1KHz signal measured with 20Hz/22Khz band pass filter.
A/D Clock Jitter = 200 pico seconds measured using 700Hz to 100kHz bandpass filter.
External wordclock jitter = <2 nano seconds measured using 700Hz to 100kHz bandpass filter.

Related Articles

article How good are the Liquid Channel converters? What are the specs? Do I need to buy an external converter?
Focusrite have strived to make the Liquid Channel converters to the highest spec so as to preserve the detail in the recorded signal and keep THD and noise to the very minimum. We are confident...
2005-08-08    Views: 2493   
article How good are the ISA 428 optional A/D converters? What are the specs?
We have strived to make the ISA converters to the highest possible quality to preserve the detailed sound of the mic pres after conversion. The 428 converters are a very serious rival to any other...
2005-08-11    Views: 2674   
article What digital options are available for the Octopre LE?
There is only one digital card which can be fitted in the Octopre LE: this gives the unit an 8-channel ADAT Lightpipe input and output. For more information check out the Octopre LE CODEC section...
2005-09-26    Views: 2552   
article I can't see the digital output connectors on the back of my new Octopre. What do I need to get?
The Octopre (and other Platinum units) do not come with digital outputs as standard. You can purchase a digital output card which you can be easily fitted into the unit to give you a digital...
2005-08-03    Views: 2210   
article I have connected my unit via S/PDIF but can only hear digital noise from the SPDIF input on my receiving device. What can I do?
This is most likely to be a sync problem so the first thing to check is that the sample frequency and bit depth are set to the same for the Platinum ADC card and for the receiving device. The...
2005-08-05    Views: 2768   


.: Powered by Lore 1.6.3

Copyright 2009 Focusrite Audio Engineering Ltd. All Rights Reserved.