Focusrite Answerbase - Deutsch
Die offizielle Quelle für schnelle Hilfe und Informationen zu Ihren Focusrite-Produkten
English | German
Glossary Contact Us
Search  
Main Index
 Aktuelle Saffire Baureihe
 Control 2802
 Focusrite/Digidesign
 Forte
 ISA Reihe
 iTrack
 Kompatibilität
 Liquid Reihe
 Manuals und Software
 Platinum Range
 Compounder
 MixMaster
 OctoPre
 Digital
 OctoPre LE
 Penta
 Platinum Digital Options
 ToneFactory
 TrakMaster
 TrakMaster Pro
 TwinTrak Pro
 VoiceMaster
 VoiceMaster Pro
 Plug-Ins
 Red Range
 Rednet
 Saffire Reihe
 Scarlett USB 2.0 Baureihe
 Technik bezogene Artikel
 VRM Box
Main Index .: Platinum Range .: OctoPre .: Can I connect my Octopre direct to my computer?

Can I connect my Octopre direct to my computer?

This is not possible - you will need an audio interface/sound card to connect the outputs of the Octopre to. The optional ADC cards for the Octopre give you the optiopn of a digital audio output but still do not allow direct connection to a computer and an audio interface with the correct digital input(s) is required. For more info on the digital cards available for the unit click here.

Related Articles

article Can I connect a guitar direct to the Liquid Channel?
The Liquid Channel does not feature a high impedance instrument input and a DI box is needed to connect an electric guitar or bass direct to it.
2005-08-08    Views: 2807   
article Can I connect an electric guitar or bass direct into the VoiceMaster?
No, the VoiceMaster does not have a high impedance instrument input. You will need a DI box between the guitar and the VoiceMaster.
2005-08-05    Views: 3047   
article Connecting an Octopre to a Digi 002.
If the optional A/D converter card is fitted then you can use a single ADAT cable to connect from either of the Octopre ADAT outputs to the ADAT in of the 002. Make sure that the bit depth and...
2005-09-24    Views: 3868   
article What is the optional card available for my VoiceMaster Pro? Does it allow me to connect straight to my computer? How much is it and where can I buy it?
The optional card contains a high spec, low jitter A/D converter and gives the VoiceMaster Pro a 24 bit S/PDIF digital output capable of up to 96KHz sample rate on an RCA phono connector. It has...
2005-08-04    Views: 2699   
article I am not sure where the connectors need to go when fitting the ADAT card in my Octopre LE - the instructions do not make it clear. What is the right way?
Check out the updated Installation Instructions for fitting the card.If you still require help then please contact us for further info.This is how the card should look, if installed correctly.
2005-09-26    Views: 2341   


.: Powered by Lore 1.6.3

Copyright 2009 Focusrite Audio Engineering Ltd. All Rights Reserved.