Focusrite Answerbase - Deutsch
Die offizielle Quelle für schnelle Hilfe und Informationen zu Ihren Focusrite-Produkten
English | German
Glossary Contact Us
Search  
Main Index
 Aktuelle Saffire Baureihe
 Control 2802
 Focusrite/Digidesign
 Forte
 ISA Reihe
 iTrack
 Kompatibilität
 Liquid Reihe
 Manuals und Software
 Platinum Range
 Compounder
 MixMaster
 OctoPre
 OctoPre LE
 Digital (ADAT)
 Penta
 Platinum Digital Options
 ToneFactory
 TrakMaster
 TrakMaster Pro
 TwinTrak Pro
 VoiceMaster
 VoiceMaster Pro
 Plug-Ins
 Red Range
 Rednet
 Saffire Reihe
 Scarlett USB 2.0 Baureihe
 Technik bezogene Artikel
 VRM Box
Main Index .: Platinum Range .: OctoPre LE .: Can I use condenser mics and dynamic mics simultaneously with my Octopre LE? Will phantom power damage the dynamic mics?

Can I use condenser mics and dynamic mics simultaneously with my Octopre LE? Will phantom power damage the dynamic mics?

The phantom power on the Octopre LE is globally switched in and out so if you are recording with condenser mics that require phantom power, any dynamic mics (that do not require phantom) that you are also using will be supplied with 48V. Generally this does not cause problems but we advise checking with the mic manufacturer first before connecting.

Related Articles

article The phantom power measures at 52V. Is this a problem?
This is perfectly normal for the unit and no damage will be caused to a microphone by the slightly increased voltage.
2005-09-26    Views: 2615   
article Can I use dynamic link with different ISA models? ISA linking explained.
It is possible to use the dynamic link with any combination of ISA 220, ISA 430 MkI and ISA 430 MkII for stereo dynamics processing. Simply connect a TRS jack cable between the dynamic link...
2005-08-10    Views: 2359   
article I can hear hum when using a dynamic mic with the TwinTrak Pro. It gets louder when I engage the 'air' switch. Is something wrong?
Unfortunately this is inevitable - dynamic mics can be good at inducing hum and the inductor circuit activated by the 'air' switch will only make it more audible. Setting the impedance to maximum...
2005-08-09    Views: 2132   
article Why do I hear hum when using a cheap, low-quality condenser mic?
The problem here is that the mic does not have a very high CMRR (noise rejection). The hum resulting from the phantom power circuit in the Octopre LE will be rejected by better designed, more...
2005-08-02    Views: 2404   
article Wie verwende ich alle 18 Eingänge des ´Scarlett 18i20´?
Das ´Scarlett 18i20´ ist mit acht analogen Eingängen ausgestattet, jedoch ist es unter zusätzlicher Verwendung der beiden digitalen Eingänge S/PDIF und ADAT möglich, alle 18 Eingänge gleichzeitig...
2013-01-23    Views: 222   


.: Powered by Lore 1.6.3

Copyright 2009 Focusrite Audio Engineering Ltd. All Rights Reserved.