There is no sound output from the digital output option. .: Focusrite Answerbase

Can I connect the AES input and output to the SPDIF input and output on my sound card?
In terms of data content there should be no problem connecting between AES and S/PDIF ports. The problem with connecting them arises from signal level issues. An AES signal amplitude is 5V...
2005-08-08 Views: 5514

No sound output when using the MIC INPUT.
- Is the power switched on?- Is the LINE switch on the front panel switched out?- Are the INPUT and OUTPUT LEVELS set correctly?- For mics that require phantom power (ie condenser microphones),...
2005-08-03 Views: 3106

I can't see the digital output connectors on the back of my new Octopre. What do I need to get?
The Octopre (and other Platinum units) do not come with digital outputs as standard. You can purchase a digital output card which you can be easily fitted into the unit to give you a digital...
2005-08-03 Views: 2210

The output meters on my VoiceMaster Pro are showing a good level but the signal is clipping my sound card input. What is going on?
We suggest that to get a good output level the gain on the VoiceMaster Pro should be set so that the signal peaks at -6 to -4dB on the output meter. The VMPro meters are calibrated in dBFS, where...
2005-08-04 Views: 2717

I have connected my VoiceMaster Pro via S/PDIF to my sound card but am only receiving signal on the left channel. What is wrong?
There is nothing wrong here. The VoiceMaster Pro is a mono unit i.e. it has one channel only. SPDIF is a stereo digital audio format i.e. it has two channels (left and right). The signal from...
2005-08-04 Views: 2728

There is no sound output from the digital output option.

Related Articles