Focusrite Answerbase - Deutsch
Die offizielle Quelle für schnelle Hilfe und Informationen zu Ihren Focusrite-Produkten
English | German
Glossary Contact Us
Search  
Main Index
 Aktuelle Saffire Baureihe
 Control 2802
 Focusrite/Digidesign
 Forte
 ISA Reihe
 iTrack
 Kompatibilität
 Liquid Reihe
 Manuals und Software
 Platinum Range
 Compounder
 MixMaster
 OctoPre
 OctoPre LE
 Penta
 Platinum Digital Options
 ToneFactory
 TrakMaster
 TrakMaster Pro
 TwinTrak Pro
 VoiceMaster
 VoiceMaster Pro
 Plug-Ins
 Red Range
 Rednet
 Saffire Reihe
 Scarlett USB 2.0 Baureihe
 Technik bezogene Artikel
 VRM Box
Main Index .: Platinum Range .: ToneFactory .: Can I record two signals simultaneously with one ToneFactory?

Can I record two signals simultaneously with one ToneFactory?

No, the ToneFactory is a mono device - you can only send one signal through it at a time. If you want to process more than one signal at a time with the ToneFactory, you must mix them together (e.g. using a mixing desk aux bus) first. If you do this you will have to apply the same processing to both sounds, which is rarely an advantage.

Related Articles

article How does the 'overdrive' circuitry on the ToneFactory work
The ToneFactory is the only piece of Focusrite equipment with the overdrive circuitry in it. It works by generating lots of harmonics from a filtered band of the input signal and allowing you to...
2005-08-08    Views: 2157   
article Can I use the AES and S/PDIF outputs of the ISA 220 A/D card simultaneously?
We do not advise this since both outputs share the same power source. There is no problem in using one of the digital outputs and the analogue output at the same time however.
2005-09-26    Views: 2394   
article Do I need wordclock to record from my ISA A/D card to my computer soundcard?
No, the digital output has a clock signal embedded within the audio signal. Simply connect the digital output of the ISA to the soundcard's digital input. The soundcard must have external sync...
2005-08-02    Views: 2881   
article Why can't I record Saffire DSP reverb directly within my sequencer?
It is not possible to record Saffire's internal DSP reverb to disk within any audio software. However, there is a good reason for this. Normally, it is not desirable to record reverb directly to...
2005-12-13    Views: 2715   
article Wie verwende ich die Eingänge des ´Forte´?
Break-Out-Kabel: Im Lieferumfang des ´Forte´ befindet sich ein optionales Break-Out-Kabel, welches auf der Rückseite des Geräts angeschlossen wird. Dieses ist mit zwei XLR-Buchsen für...
2012-09-21    Views: 286   


.: Powered by Lore 1.6.3

Copyright 2009 Focusrite Audio Engineering Ltd. All Rights Reserved.