Can I use the AES and S/PDIF outputs of the ISA 220 A/D card simultaneously? .: Focusrite Answerbase

I have connected my VoiceMaster Pro via S/PDIF to my sound card but am only receiving signal on the left channel. What is wrong?
There is nothing wrong here. The VoiceMaster Pro is a mono unit i.e. it has one channel only. SPDIF is a stereo digital audio format i.e. it has two channels (left and right). The signal from...
2005-08-04 Views: 2728

I can hear software outputs 1 and 2 on other outputs.
Above the input, S/W mix slider for outputs 3+4, is a switch for either 1/2 or 3/4. This switch either routes the audio from 1+2 or 3+4 to that output. There is a similar switch for the first 10...
2006-09-26 Views: 2640

If there are only 8 analogue outputs, how come there are 5 output pairs available in the lower half of SaffireControl?
As you can see from the symbol at the bottom of each output pair section, the last pair (9/10) is the SPDIF Output. Also, outputs 5/6 and 7/8 are the same signals as Headphones 1 and Headphones 2...
2005-08-01 Views: 2715

Can I record two signals simultaneously with one ToneFactory?
No, the ToneFactory is a mono device - you can only send one signal through it at a time. If you want to process more than one signal at a time with the ToneFactory, you must mix them together...
2005-08-08 Views: 2065

Wie verbinde ich die VRM Box zu meinen bestehenden Interface?
1. Verbinden Sie die VRM Box an das USB Anschluss Ihres Computers mit dem mitgelieferten USB Kabel 2. Verbinden Sie den S/PDIF Ausgang Ihres Audio Interfaces am S/PDIF Eingang Ihrer VRM Box...
2011-09-19 Views: 890

Can I use the AES and S/PDIF outputs of the ISA 220 A/D card simultaneously?

Related Articles