The phantom power measures at 52V. Is this a problem? .: Focusrite Answerbase

I get a loud burst of noise when turning the phantom power on on my VoiceMaster Pro. Is this normal?
This owing to the capacitors charging and is normal. We suggest making sure your monitors are muted when switching on phantom power or when switching the unit on with phantom power switched in....
2005-08-05 Views: 2277

The Phantom power on my VoiceMaster Pro is not working. What can I do?
Firstly ensure that it is the phantom power and not something else that is causing the problem. Check that the mic and mic cable are not damaged. Use different mics that require phantom power to...
2005-08-05 Views: 2066

Can I use condenser mics and dynamic mics simultaneously with my Octopre LE? Will phantom power damage the dynamic mics?
The phantom power on the Octopre LE is globally switched in and out so if you are recording with condenser mics that require phantom power, any dynamic mics (that do not require phantom) that you...
2005-08-04 Views: 2518

Die Instrumenten/Line-LEDs am Saffire zeigen beide "INSTR", und ich kann nicht "LINE" anwählen. Was kann ich tun?
Ihr Saffire könnte sich im Low Power Mode befinden. Versuchen Sie die Firwire-Verbindung zum Saffire zu trennen und wieder anzuschließen. Wenn Sie das externe Netzteil verwenden, trennen Sie dieses...
2005-08-01 Views: 3403

Plugging in a Saffire causes my mac to power down.
Certain Apple Macs are more sensitive to power issues than others. If you find that when the Saffire boots up, your mac turns itself off then this is because the mac sees 'too much' power being...
2006-09-27 Views: 2840

The phantom power measures at 52V. Is this a problem?

Related Articles