Pin out for the Octopre full spec AD card. .: Focusrite Answerbase

I am not sure where the connectors need to go when fitting the ADAT card in my Octopre LE - the instructions do not make it clear. What is the right way?
Check out the updated Installation Instructions for fitting the card.If you still require help then please contact us for further info.This is how the card should look, if installed correctly.
2005-09-26 Views: 2341

Can I stop the Octopre from defaulting to the same digital card settings every time I turn it on?
The Octopre does not have a memory chip in it so it will always turn on with the same bit rate and sample frequency settings. We advise that the Octopre is the first thing to be turned on in a...
2005-08-03 Views: 2316

Connecting an Octopre to a Digi 002.
If the optional A/D converter card is fitted then you can use a single ADAT cable to connect from either of the Octopre ADAT outputs to the ADAT in of the 002. Make sure that the bit depth and...
2005-09-24 Views: 3869

What digital options are available for the Octopre LE?
There is only one digital card which can be fitted in the Octopre LE: this gives the unit an 8-channel ADAT Lightpipe input and output. For more information check out the Octopre LE CODEC section...
2005-09-26 Views: 2550

I can't see the digital output connectors on the back of my new Octopre. What do I need to get?
The Octopre (and other Platinum units) do not come with digital outputs as standard. You can purchase a digital output card which you can be easily fitted into the unit to give you a digital...
2005-08-03 Views: 2208

Pin out for the Octopre full spec AD card.

Related Articles