Focusrite Answerbase - Deutsch
Die offizielle Quelle für schnelle Hilfe und Informationen zu Ihren Focusrite-Produkten
English | German
Glossary Contact Us
Search  
Main Index
 Aktuelle Saffire Baureihe
 Control 2802
 Focusrite/Digidesign
 Forte
 ISA Reihe
 iTrack
 Kompatibilität
 Liquid Reihe
 Manuals und Software
 Platinum Range
 Plug-Ins
 Red Range
 Rednet
 Saffire Reihe
 Saffire
 Saffire Control Software
 Saffire LE
 Saffire Plugins
 Saffire PRO 10 & 26
 Saffire Range: Compatibility
 Saffire Range: Mac Specific
 Saffire Range: PC Specific
 Scarlett USB 2.0 Baureihe
 Technik bezogene Artikel
 VRM Box
Main Index .: Saffire Reihe .: Saffire Control Software .: SaffireControl connection lost message

SaffireControl connection lost message

If you get the message"Connection to Saffire/Saffire LE/Saffire Pro lost...." please check the firewire cable is seated properly in both Saffire and computer.

Saffire PRO only: Check that the Unit ID is set to the correct Saffire pro and hit the ID button

Try an alternative firewire port if available.

If there are any other firewire devices attached to the computer or Saffire then check for any driver / firmware updates for the said device.

Related Articles

article Installation and connection problems, and clicks and pops with Windows XP Service Pack 2
There is a IEEE 1394 (firewire) driver patch available for Windows XP SP2. Even if you have automatic updates turned on, you will still need to manually download and intall the update Please...
2006-09-26    Views: 11351   
article Saffire PACE authorisation on PC
After installing SaffireControl and the Saffire drivers on the PC, you will see a dialogue with the option to install the Saffire VST plugins. At this point you have the option to authorise the...
2005-08-04    Views: 3870   
article How can I authorise my Saffire plugins if my computer doesn't have internet connection?
To be able to use your plug-ins you need to run the plug-in authoriser. This should load as a pop-up window when you open your DAW software and it scans the plug-in directory. Follow the...
2005-08-01    Views: 5148   
article If there are only 8 analogue outputs, how come there are 5 output pairs available in the lower half of SaffireControl?
As you can see from the symbol at the bottom of each output pair section, the last pair (9/10) is the SPDIF Output. Also, outputs 5/6 and 7/8 are the same signals as Headphones 1 and Headphones 2...
2005-08-01    Views: 2710   
article Saffire 192k operation: What's different?
This article is important for anyone wanting to utilise the 192k sampling rate with their Saffire. First of all, switching into 192k can be achieved within the 'Sample Rate Window' of the...
2005-12-12    Views: 2863   


.: Powered by Lore 1.6.3

Copyright 2009 Focusrite Audio Engineering Ltd. All Rights Reserved.