Focusrite Answerbase - Deutsch
Die offizielle Quelle für schnelle Hilfe und Informationen zu Ihren Focusrite-Produkten
English | German
Glossary Contact Us
Search  
Main Index
 Aktuelle Saffire Baureihe
 Control 2802
 Focusrite/Digidesign
 Forte
 ISA Reihe
 iTrack
 Kompatibilität
 Liquid Reihe
 Manuals und Software
 Platinum Range
 Plug-Ins
 Red Range
 Rednet
 Saffire Reihe
 Saffire
 Saffire Control Software
 Saffire LE
 Saffire Plugins
 Saffire PRO 10 & 26
 Digital
 Monitoring
 Standalone Mode
 Saffire Range: Compatibility
 Saffire Range: Mac Specific
 Saffire Range: PC Specific
 Scarlett USB 2.0 Baureihe
 Technik bezogene Artikel
 VRM Box
Main Index .: Saffire Reihe .: Saffire PRO 10 & 26 .: Standalone Mode .: There is a problem with the output volume in Standalone mode

There is a problem with the output volume in Standalone mode

When using Standalone Mixer mode it is important to check the output levels are set up in SaffireControl PRO.

The only alterations to the saved set up that can be made when used in standalone mode are the analogue input gain and the headphone output level.

Makes sure that everything else is set up how you want it before disconecting.

Related Articles

article Standalone mode options.
There are two choices for using the Saffire pro in standalone mode. Tracking Mode will route the analogue inputs to the ADAT outputs, and the ADAT inputs to the analogue outputs. Mixer Mode...
2006-09-26    Views: 3121   
article What's the difference between Soundcard Mode and Track Mode?
SaffireControl has two buttons on the bottom right that are used to select the two main modes of operation (TRACK MODE and SOUNDCARD MODE; the first is the standard tracking mode for recording (the...
2005-08-01    Views: 4544   
article I find that I have to turn the gain on my Penta up very high to get a good input level. Is there a problem?
There is most likely nothing wrong with your Penta - note that its meters measure in dBFS. This is because there is an optional digital output and it is important to know the clipping point of...
2005-08-08    Views: 2241   
article No sound output when using the MIC INPUT.
- Is the power switched on?- Is the LINE switch on the front panel switched out?- Are the INPUT and OUTPUT LEVELS set correctly?- For mics that require phantom power (ie condenser microphones),...
2005-08-03    Views: 3101   
article I can't get any sound from the monitor outputs of my VoiceMaster Pro when using the mic input.
Check the following:ï Is the power switched on?ï Is the LINE switch on the front panel switched out?ï Are the INPUT and OUTPUT LEVELS set correctly?ï For microphones that require...
2005-08-03    Views: 2504   


.: Powered by Lore 1.6.3

Copyright 2009 Focusrite Audio Engineering Ltd. All Rights Reserved.