Focusrite Answerbase - Deutsch
Die offizielle Quelle für schnelle Hilfe und Informationen zu Ihren Focusrite-Produkten
English | German
Glossary Contact Us
Search  
Main Index
 Aktuelle Saffire Baureihe
 Control 2802
 Focusrite/Digidesign
 Forte
 ISA Reihe
 ISA 110 Limited Edition / ISA 215
 ISA 220 Session Pack
 ISA 428 Pre Pack
 ISA 430 MKII Producer
 ISA 828
 ISA 828 Digital Card
 ISA Two
 iTrack
 Kompatibilität
 Liquid Reihe
 Manuals und Software
 Platinum Range
 Plug-Ins
 Red Range
 Rednet
 Saffire Reihe
 Scarlett USB 2.0 Baureihe
 Technik bezogene Artikel
 VRM Box
Main Index .: ISA Reihe .: ISA 828 .: ISA 828 Digital Card

ISA 828 Digital Card

Articles

article Digital Card Jumper Positions - Disabling Channels 5-8
Four jumpers on the digital card can be made to disable channels 5-8 on the AES Output. This is so that a standard 25-pin to 25-pin Pro ToolsTM cable can be used to record channels 1-4 at 192kHz....
2007-10-15    Views: 1787   
article ISA 828 Recording AES Outputs 1-8 to Pro Tools HD at 192kHz
To record all eight channels digitally to Pro ToolsTM HD at 192kHz, all eight AES channels need to be enabled on the ISA 828 (default jumper positions shown here) and 2 Digital cards must be...
2007-10-15    Views: 2077   
article ISA 828 ADC DB25 Pin Out Configurations

2007-10-19    Views: 1477   
article ISA 828 ADC ADAT Output Configurations
The ADATTM output connectors operate as follows: 44.1/48kHz sample rates: Connector 1 = channels 1 to 8 in parallel Connector 2 = channels 1 to 8 in parallel (identical to connector 1)...
2007-10-16    Views: 2901   


.: Powered by Lore 1.6.3

Copyright 2009 Focusrite Audio Engineering Ltd. All Rights Reserved.