Die offizielle Quelle für schnelle Hilfe und Informationen zu Ihren Focusrite-Produkten .: Focusrite Answerbase

Wie verbinde ich die VRM Box zu meinen bestehenden Interface?
1. Verbinden Sie die VRM Box an das USB Anschluss Ihres Computers mit dem mitgelieferten USB Kabel 2. Verbinden Sie den S/PDIF Ausgang Ihres Audio Interfaces am S/PDIF Eingang Ihrer VRM Box...
2011-09-19 Views: 889

Can I connect the AES input and output to the SPDIF input and output on my sound card?
In terms of data content there should be no problem connecting between AES and S/PDIF ports. The problem with connecting them arises from signal level issues. An AES signal amplitude is 5V...
2005-08-08 Views: 5511

How is the 9-pin / D-Sub connector configured?
The 9-pin D-Sub connector on the 430 MkII ADC card is not a standard 'serial' port and does not send data that a serial port on a computer would receive and understand. It can be switched between...
2005-08-02 Views: 4183

What is the optional card available for my VoiceMaster Pro? Does it allow me to connect straight to my computer? How much is it and where can I buy it?
The optional card contains a high spec, low jitter A/D converter and gives the VoiceMaster Pro a 24 bit S/PDIF digital output capable of up to 96KHz sample rate on an RCA phono connector. It has...
2005-08-04 Views: 2700

I have connected my unit via S/PDIF but can only hear digital noise from the SPDIF input on my receiving device. What can I do?
This is most likely to be a sync problem so the first thing to check is that the sample frequency and bit depth are set to the same for the Platinum ADC card and for the receiving device. The...
2005-08-05 Views: 2766

Wie verwende ich alle 18 Eingänge des ´Scarlett 18i20´?
Das ´Scarlett 18i20´ ist mit acht analogen Eingängen ausgestattet, jedoch ist es unter zusätzlicher Verwendung der beiden digitalen Eingänge S/PDIF und ADAT möglich, alle 18 Eingänge gleichzeitig...
2013-01-23 Views: 227

I can't see the digital output connectors on the back of my new Octopre. What do I need to get?
The Octopre (and other Platinum units) do not come with digital outputs as standard. You can purchase a digital output card which you can be easily fitted into the unit to give you a digital...
2005-08-03 Views: 2209

Platinum ADC R2 (MH444) card installation problems - what are jumpers and which ones do I remove?
The jumpers are small black rectangular clips on the pcb itself. You can remove the top which leaves two small wires poking up. Removing the jumper breaks the connection at that point in the...
2005-08-10 Views: 2884

What's the difference between ISA 430 MK I and II?
The 430 and 430 MkII are sonically very similar. The pre-amp, compressor, EQ, gate and de-esser circuits use the same designs. The elements in the MkII which will give a different sonic result...
2005-08-02 Views: 3628

Can I use the AES and S/PDIF outputs of the ISA 220 A/D card simultaneously?
We do not advise this since both outputs share the same power source. There is no problem in using one of the digital outputs and the analogue output at the same time however.
2005-09-26 Views: 2394

How good are the ISA 428 optional A/D converters? What are the specs?
We have strived to make the ISA converters to the highest possible quality to preserve the detailed sound of the mic pres after conversion. The 428 converters are a very serious rival to any other...
2005-08-11 Views: 2673

Snow Leopard User (Mac OS X 10.6) - Saffire Mix Control setzt ständig die falsche Sync Quelle
Falls dies auf Ihr System zutreffen sollte, navigieren Sie zu Macintosh HD > Programme > Dienstprogramme > Audio MIDI Setup . Selektieren Sie Ihr Saffire im Audiogerät Fenster und vergewissern Sie...
2011-11-25 Views: 846

I have connected my VoiceMaster Pro via S/PDIF to my sound card but am only receiving signal on the left channel. What is wrong?
There is nothing wrong here. The VoiceMaster Pro is a mono unit i.e. it has one channel only. SPDIF is a stereo digital audio format i.e. it has two channels (left and right). The signal from...
2005-08-04 Views: 2727

Zusätzliche Einstellungen in Saffire Mix Control für den Liquid Saffire 56
Es wurden innerhalb Saffire MixControl Version 1.8 oder aktueller, zwei neue Einträge im Settings Menü für den Liquid Saffire 56 dazu addiert. Diese wurden nicht in der Bedienungsanleitung...
2011-12-12 Views: 616

What is the difference between the Octopre and Octopre LE?
Most notable is the pre-amp designs. They are similar in performance but not identical. The original OctoPre is a typical Class A Platinum design, (based around a 737 Rhom transistor) the LE is an...
2005-08-02 Views: 2594

Search Results

Articles