Die offizielle Quelle für schnelle Hilfe und Informationen zu Ihren Focusrite-Produkten .: Focusrite Answerbase

The phantom power measures at 52V. Is this a problem?
This is perfectly normal for the unit and no damage will be caused to a microphone by the slightly increased voltage.
2005-09-26 Views: 2618

The LEDs do not illuminate
Ã¯ Is the POWER switched on?Ã¯ Is the correct mains voltage being used for your unit? If not, the fuse may blow, requiring the correct fuse to be refitted. (See Fuse changing in the GENERIC SETUP)
2005-08-03 Views: 2278

Noise is present on all four channels of my 428. Is there a fault?
If you have a digital card in your unit then check both analogue and digital outputs for noise. If you can hear the noise on all the analogue outputs as well as the digital outputs check that...
2005-08-10 Views: 2052

What are the Power Supply Specs for my Saffire LE?
The Saffire LE's Power Supply has the following specifications: Output Voltage: 12 Volts Output Current: 0.6 or 0.7 Amps, Direct Current (There has been a running change in Power Supplies...
2007-09-13 Views: 2446

What are the Power Supply Specs for my Saffire?
The Saffire's Power Supply has the following specifications: Output Voltage: 12 Volts Output Current: 1.5 Amps, Alternating Current (AC) Model Numbers: Begin with "SY-1215" and then depends on...
2007-09-13 Views: 2413

What are the Power Supply Specs for my Liquid Mix?
The Liquid Mix's Power Supply has the following specifications: Output Voltage: 12 Volts Output Current: 1.5 Amps, Alternating Current (AC) Model Numbers: Begin with "SY-1215" and then depends...
2007-09-13 Views: 1908

What are the Power Supply Specs for my Saffire PRO?
The Saffire PRO's Power Supply has the following specifications: Output Voltage: 15 Volts Output Current: 0.6/1.4 Amps, Alternating Current (AC) Below are pictures of the Saffire PRO's Power...
2007-09-13 Views: 2184

Step-down/up transformers and digital sync problems with the Octopre.
If you are using your Octopre with a step-down/up transformer and are experiencing sync problems then it could be down to the quality or age of the step down transformer. If the converter is...
2005-08-03 Views: 2316

My Penta does not power on. What can I do?
There is a fuse in a holder on the back of the Penta which may have blown. You can lever the holder out with a flathead screwdriver. Check the fuse to see if it is blown and, if it is, replace it...
2005-08-09 Views: 1807

How do I operate the Red 5 and how can I detect a fault?
The Red 5 Precision Stereo Power Amplifier possesses 2 x 250W RMS continuous rating into 8ohms and a peak capability of over 800W with extremely low distortion and wide bandwidth. Some tips on...
2006-03-25 Views: 2236

Guide to Setting up your Studio Part 1
Continue To Part 2This article is a tutorial-style guide to setting up your system correctly, and eliminating any problems to get the best results from your studio. The two most popular home...
2005-08-03 Views: 19026

Guide to Setting up your Studio Part 2
Back To Part 1 | Continue To Part 3 Impedance Issues Some users seem concerned about whether the impedance differences between various inputs and outputs will cause any problems with their...
2005-08-04 Views: 12567

What is Optical compression?
Article from Sound On Sound Q+A, September 2003 After microphones, nothing stirs up a group of music professionals so much as a discussion about compressors. Essentially, compressors are...
2005-11-22 Views: 4753

Search Results

Articles