Saffire 6 USB Audio Interfaces 2 IN / 4 OUT USB AUDIO INTERFACE FEATURING TWO FOCUSRITE PREAMPS

MOVIES

IMAGES

Saffire 6 USB 2 IN / 4 OUT USB AUDIO INTERFACE FEATURING TWO FOCUSRITE PREAMPS

BUY NOW

Introduction Key features Setup Diagrams Plug-in Suite The Focusrite Pre Xcite+ Pack Performance System Requirements Specifications Operating Systems

IntroductionBack top

The Focusrite Saffire 6 USB is a 2 in / 4 out USB audio interface. It uses the same award-winning Focusrite mic preamps as the rest of the Saffire range. This makes it the best value, and best sounding interface in its class. Its output configuration is also ideal for laptop DJs.

It is ultra-reliable and easy to set up, providing you with the simplest route to record into, and play back from your computer. It has lower latency than any of its rivals, and professional analogue to digital converters ensure you get the best possible signal into your recording software.

With 2 mic pres, multiple outputs and MIDI I/O, the Saffire 6 USB can be at the centre of your home recording set-up. However, its reliability means that you can take it out and record on location with confidence. The 2 in 4 out configuration is perfect for laptop DJs who need to be able to cue up material, or send two different signals to either side of a DJ mixer.

This is our most affordable interface to date, and it comes with Ableton Live Lite 8, Novation's Bass Station synthesizer and over a gigabyte of samples. In addition to all this, you get the Focusrite FX Suite, which includes a compressor, gate, reverb and EQ to upgrade your standard AU/VST effects.

The Saffire 6 USB is certainly the easiest way of getting the classic Focusrite mic preamp into your recording set-up.

Setup DiagramsBack top

Diagram 1: Recording into your DAW

Diagram 2: Connecting to a DJ Mixer

Diagram 3: Connecting Saffire 6 USB to Loudspeakers.

(NOTE: Both 1/4" outputs (1-2) and RCA outputs (1-4) on the rear panel can be used to connect to speakers.)

The Focusrite PreBack top

Focusrite has, over the past two decades, built a reputation as the market leader for high-quality recording equipment, with its mic preamp technology as the cornerstone of that enviable reputation. The original mic pre, as featured in the early Focusrite Forté console, used rotary switched gain controls and high-quality audio transformers. This mic preamp is still used by many of the industries greatest producers and is the sound of countless hit records. Today, Focusrite design equipment for a far greater audience, from professionals to amateur enthusiasts, all with varying budgets.

As with the Red and ISA ranges, the mic pre technology found in the Saffire range is designed to the highest possible standards. They uphold the same wide bandwidth philosophy featured in the original Forté console, back in 1989. All Focusrite mic preamps feature custom components which have undergone an intense testing and qualification process. With the facts and figures in, Focusrite designs then have to pass the essential listening stage. Any design can measure well on the test bench but only a great design can be qualified in the studio. The FET-based design in the Saffire range is no exception and ensures the same low noise and distortion performance as earlier transformer-based designs. It delivers clarity without colouration and exhibits the signature transparency for which Focusrite have become famous.

PerformanceBack top

We always quote 'real world' performance figures (measured to the AES17 standard). Some companies choose to quote chipset performance, which is misleading, and here's why.

Key Performance Figures

Real World ADC Dynamic Range: 105 dB (A-weighted)

Real World DAC Dynamic Range: 103 dB (A-weighted)

Chipset ADC/DAC Dynamic Range: 114 dB (A-weighted)

Latency (Minimum Buffer Size): 77 Samples

Note: For Latency, the test machine was a Dual Core 2.66gHz Xeon Mac Pro with 2GB of RAM, running 10.5.7

Microphone Inputs

• Dynamic Range (A-Weighted): 105 dB

• SNR (A-weighted): -105 dB

• Frequency Response: 20Hz - 20kHz +/- 0.1 dB

• THD+N: 0.0025% (measured at 1kHz with a 20Hz/22kHz bandpass filter)

• Noise: EIN > 120dB (measured with 50dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)

• Maximum Input level @ Minimum gain for 0 dBFS (without pad): -2.5 dBu

• Pad Attenuation: 10 dB

Line Inputs

• Dynamic Range (A-weighted): 105 dB

• SNR (A-weighted): 105 dB

• Frequency Response: 20Hz - 20kHz +/- 0.1dB

• THD+N (A-Weighted): < 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)

• Noise: -90dBu (22Hz/22kHz bandpass filter)

• Maximum level (A-weighted): 16.3dBu at 1%

Instrument Inputs

• Dynamic Range (A-weighted): 105 dB

• SNR (A-weighted): 105 dB

• Frequency Response 20Hz-20KHz +/- 0.1 dB

• THD+N, -1dBFS, min gain, no pad < 0.0025%

• Maximum Input Level for 0 dBFS (minimum gain, no pad): -3 dBu • Maximum Input Level for 0 dBFS (maximum gain, no pad): -53 dBu • Maximum Input Level for 0 dBFS (minimum gain, with pad): +7 dBu

• Maximum Input Level for 0 dBFS (maximum gain, with pad): -43 dBu

• Pad Attenuation: 10 dB

• Crosstalk: > 80 dB

Analogue Audio Outputs 1-2 (¼" TRS)

• Electronically Balanced Outputs

• Maximum Output Level (0dBFS): +9 dBu

• THD+N: 0.0025% (0 dBFS input, 20Hz/22kHz bandpass filter)

Analogue Audio Outputs 1-4 (RCA phono)

• Unbalanced Outputs

• Maximum output level (0dBFS): -3.5 dBu

• THD+N: 0.03% (0 dBFS input, 20Hz/20kHz bandpass filter)

Headphone Outputs

• Frequency Response: 20Hz-20KHz +/- 0.1 dB

• SNR (A-weighted): 103 dB

• Dynamic Range: 103 dB

• Maximum Output into 32R: +3 dBu (-1.4 dBV)

• Power into 32R: 24 mW

• Output Impedance: < 7 Ohms

• Load Impedance: > 24 Ohms

Additional Conversion Performance

• Clock jitter < 250 picoseconds

Supported Sample Rates
• 44.1kHz / 48kHz

Specifications Back top

CONNECTIVITY

Analogue Channel Inputs (Inputs 1-2)

• 2 x XLR Mic/Line/Inst Neutrik Combi-Jacks (Inputs 1-2)

• Automatic switch of Mic / Line (inserting a jack switches from Mic to either Line or • Instrument (instrument selected via front panel)

Analogue Audio Outputs (Outputs 1-4)

• 2 x TRS analogue outputs (Outputs 1-2)

• 4 x RCA Phono outputs (Outputs 1-4)

• 1 x TRS stereo headphone output (switchable to outputs 1 and 2, or 3 and 4)

Other I/O

• 1 x USB 1.1 compliant USB port

• 1 x pair of MIDI I/O

Dimensions

W = 145 mm / 5 ¾ “, H = 45 mm / 1 ¾ ” , D = 220 mm / 8 ¾ “

Weight

1 kg / 2.2 lbs

Controls and Indicators

• 2 x Input gain control dials

• 2 x Signal (green) and Overload LED (red)

• 2 x Instrument LED and switch (red)

• 2 x Pad LED and switch (red)

• 1 x Phantom power switch with LED (red) – global for Mic inputs 1-2

• 1 x USB (Active) LED (green)

• 1 x MIDI (Active) LED (green)

• 1 x Monitoring 1+2 / 3+4 A/B switch

• 1 x Monitoring 3+4 indicator LED

• 1 x Main monitor Level control

• 1 x Mono monitor output switch

• 1 x Playback/Input mix dial

• 1 x Headphones level control

Operating SystemsBack top

Use our OS checker to find the latest operating system support for your product. OS CHECKER

Compatible with:

Windows Vista
Windows XP
Service Pack 2 and above only. Windows XP - 64bit
Service Pack 2 and above only. Mac 10.6
Support is currently only for the 32-bit kernel on 10.6 (Snow Leopard). Mac 10.5
10.5.7 and above only. Windows Vista - 64bit
Windows Windows 7
Windows Windows 7 - 64bit

NOT Compatible with:

Mac 10.3
Mac 10.4

Key featuresBack top

Two high-quality award-winning Focusrite preamps

The best sounding interface in its class. Focusrite's unparalleled preamp legacy forms the foundation of this new interface, with two award-winning Focusrite preamps.

Ultra-reliable and easy to set up

Saffire 6 USB is simple to set up and easy to use, allowing you to concentrate on recording and playing back. It is also very reliable, ideal for use as a portable interface for use on stage and on location.

High-quality 24-bit USB interface

Features the best A-D / D-A conversion in its class; pristine audio quality, super-low latency and reliable synchronisation are guaranteed.

Ready for DJs

4 RCA outputs, high-level headphone output and class-leading digital converter performance make Saffire 6 USB the ideal interface for the laptop DJ.

Xcite+ Software Bundle

Featuring a host of royalty-free loops and samples, a full-fledged soft-synth and Ableton Live Lite 8, providing an affordable upgrade path to Ableton Live.

Focusrite VST/AU Plug-in Suite, for use in the mix

Upgrade your standard sequencer effects and bring a touch of class to your session with all-new Focusrite Compression, Reverb, Gating and EQ VST/AU plug-ins.

Dedicated switchable front-panel headphone bus

Monitor either the main mix or cue mix via headphones, all switchable from the front panel.

Dedicated input/playback mix dial

Blend your monitor mix between what you're recording and the audio from the computer, for true zero-latency monitoring.

Additional Features

Bus-powered for a tidy mobile recording rig

Saffire 6 USB is powered via USB, with not need for an additional power supply.

Two Hi Z instrument inputs

No need for a separate DI. Saffire 6 USB provides instrument inputs with switchable high gain.

Tactile Monitor dial

A front panel volume dial provides immediate control over the main stereo outputs.

Switchable phantom power

Available across both mic pre inputs, globally switchable direct from the front fascia.

Plug-in Suite Back top

Saffire 6 USB includes the Focusrite Plug-in Suite, produced by the same team that who developed Novation's nio FX rack and Saffire PRO 40 Control. They provide the perfect upgrade from your standard sequencer effects with all-new Focusrite Compression, Reverb, Gating and EQ VST/AU plug-ins, for use in the mix.

Each plug-in has a host of presets that provide a reasonable starting point, delivering suitable solutions for the chosen sound source. Having selected a preset, you can then go on to finely tune these settings.

The compressor and gate have been modeled on the Focusrite's hardware devices, using the measurement of custom optos to achieve the signature Focusrite sound. (All Focusrite optos are tuned by ear, just like in the old days of analog design, ensuring a faithful recreation of those classic vintage 1960s optical compressors.)

With the same signature as the original Focusrite EQ curves. Focusrite's R&D team used state-of-the-art numerical transform techniques to create an authentic response across the entire audible frequency spectrum for this software EQ.

The Reverb is based on classic algorithmic studio reverb designs.

Xcite+ PackBack top

'Xcite+' comes on a DVD-ROM filled to the brim with royalty-free loops and samples alongside some powerful applications ideal for getting the new user started, or to expand the experienced user’s creative toolbox.

Ableton Live Lite 8 forms the foundation of this collection, providing the ideal platform to create, produce and perfom. Novation’s classic bass synth, ‘Bass Station’ enables you to create bass and 303-styled patches. Alongside these comes 'Mike the Drummer'; a collection of 572 inspiring and original live drum loops ranging from 79 to 191 bpm, with loop lengths ranging from 1 beat to 4 bars, as well as extended freestyle solo sections. Individual drum hits and REX files are also available.These drum loops are however, just the beginning. An entire gigabyte of royalty-free samples, exclusively compiled by LoopMasters, provide a selection of loops and samples large enough to satisfy the appetite of even the most demanding artist.

The Xcite+ Pack bundle is Windows XP, 32 bit Vista, Mac OS X and Intel Mac compatible.

Ableton Live Lite

Find Out More

Novation Bass Station

Find Out More

'Mike the Drummer' A collection of 572 inspiring and original live drum loops

Find Out More

Over 1 Gig of royalty-free samples from samples legends, LoopMasters

Find Out More

System Requirements Back top

Macintosh

• Computer: Apple Macintosh with a USB 1.1 compliant USB port

• CPU/Clock: PowerPC G4/1 GHz or higher (Intel/Dual 1 GHz or better recommended

• Memory (RAM): 512 MB (1 GB or more recommended)

• Screen Resolution: 1024x768 (1280x1024 or more recommended)

Windows

• Computer: Windows compatible computer with a USB 1.1 compliant USB port

• CPU/Clock: Pentium or AMD with 1 GHz or higher (Dual 1 GHz or better recommended)

• Memory (RAM): 512 MB (1 GB or more recommended)

• Screen Resolution: 1024x768 (1280x1024 or more recommended)

Reviews

“ Although well-suited for musicians, the Saffire 6 USB also specifically... ”

Although well-suited for musicians, the Saffire 6 USB also specifically caters to digital DJs. Two sets of stereo RCA phone outputs let you split two channels of audio out to DJ mixer inputs, or you can go with balanced 1/4″ TRS outputs for sending straight out to powered speakers. The 1/4″ headphone jack in the front is powerful enough for the club and has independent gain control and a switch for cueing between the two sets of RCA outputs.

Two mic/instrument inputs provide renown Focusrite preamps with optional phantom power, and you get MIDI I/O ports as well. Even if the included Ableton Live Lite 7 is child’s play for you, the bundled Focusrite plug-in suite (compression, reverb, gate, EQ) and Novation Bass Station software synth are a nice bonus.

With it’s heavy-duty metal chassis, the Saffire 6 USB could be your all-in-one DJ/live PA/home studio workhorse.

DJTechTools.com

2010

Downloads

Focusrite USB Driver Update

Release notes:

-Fixed potential driver installation problem when using the Saffire 6 USB with other USB devices.
-Fixed kernel panic when used alongside Digidesign Mbox 2
MAC Focusrite USB Driver 2.2 OS X
CLOSE

Saffire 6 USB User Guide

Saffire 6 USB Manual
Download French Spanish German English Japanese
CLOSE

Focusrite USB Driver

Focusrite USB Drivers 1.8 release notes (Windows):

-Fixed problem with Saffire 6 USB causing a system crash if sent MIDI sysex data

If you have had problems seeing the Focusrite ASIO Driver in your DAW then you will need to perform the following actions:  

1)Install the Focusrite USB Drivers version 1.8
2)Uninstall 1.8 (this will clear any setup problems caused by previous installs)
 3)Re-install the Focusrite USB Drivers 1.8

NB   Customers who use the Novation ASIO drivers for audio via the Xio, X-station, nIO or Speedio should note that they will not be able to do so whilst the Saffire 6 USB is installed on their system.
WIN Focusrite USB Driver-1.8.exe
CLOSE

Focusrite USB Driver Update

Release notes:

-Fixed problem where Saffire 6 USB could stop passing audio during use
-Sending the 6 USB Running Status messages could cause other MIDI data to be dropped
-The 6 USB now no longer needs to be selected as an audio device to receive MIDI data

Known issues:
-Users should connect other Novation devices to a different USB bus to the Saffire 6 USB as bandwidth limitation prevents these devices from functioning together on the same bus
MAC Focusrite USB Driver-2.3.dmg
CLOSE

Share |

Answerbase

Saffire 6 USB Troubleshooting Guide Utilising the RCA (Phono) Outputs on the Saffire 6 USB My Windows PC is having trouble powering my 6 USB